Our Fertilizer Products
We import fertilizers for the government’s flagship program: planting for food and jobs and the open market. Beft Agro has also developed a partnership with the Ghana Cocoa Board to supply Cocobod with soil neutralizing chemical called Calciprill. This is our way of enhancing crop productivity in Ghana. The Calciprill chemical is good at neutralizing soil acidity and enhancing the overall crop yielding capacity of the soil.
These are our fertilizer products. We're importers and suppliers of fertilizers to distributors and retailers across the country.
NPK Fertilizers
NPK Fertilizers
Urea Fertilizers
Ammonium Fertilizers
Phosphate & Potassium Fertilizers
Micronutrient Fertilizers
Organic Manures
NPK Fertilizers
The NPK COMPLEX 15-15-15 Fertilizer
Properties of the NPK COMPLEX 15-15-15
Moisture content by weight: maximum 1.5%
Total nitrogen content by weight (on dry basis): minimum 15%
Neutral ammonium citrate soluble phosphate (as P2O5)
Content by weight: minimum 15%
Water-soluble phosphate (as P2O5) content by weight: minimum 12%
Water-soluble potash (as K2O) content by weight: minimum 15%
Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm size
Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethene inner lining. 4% empty bags to be supplied at no extra cost.
The NPK COMPLEX 23-10-5 Fertilizer
Properties of the NPK COMPLEX 23-10-5
Moisture content by weight: maximum 1.5%
Total nitrogen content by weight (on dry basis): minimum 23%
Water-soluble phosphate (as P2O5) content by weight: minimum 10%
Water-soluble potash (as K2O) content by weight: minimum 5%
The NPK COMPLEX 20-10-10 Fertilizer
Properties of the NPK COMPLEX 20-10-10
Moisture content by weight: maximum 1.5%
Total nitrogen content by weight (on dry basis): minimum 20%
Water-soluble phosphate (as P2O5) content by weight: minimum 10%
Water-soluble potash (as K2O) content by weight: minimum 10%
The NPK COMPLEX 15-20-20 + 0.7Zn Fertilizer
Properties of the NPK COMPLEX 15-20-20 + 0.7Zn
Moisture content by weight: maximum 1.5%
Total nitrogen content by weight (on dry basis): minimum 15%
Water-soluble phosphate (as P2O5) content by weight: minimum 20%
Water-soluble potash (as K2O) content by weight: minimum 20%
The NPK COMPLEX 11-22-21+5S+0.7Zn+0.5B Fertilizer
The NPK COMPLEX 11-22-21+5S+0.7Zn+0.5B Fertilizer
Moisture content by weight: maximum 1.5%
Total nitrogen content by weight (on dry basis): minimum 11%
Water-soluble phosphate (as P2O5) content by weight: minimum 22%
Water-soluble potash (as K2O) content by weight: minimum 21%
Trace elements such as Zinc Sulphate and boron will be added to do the blend
UREA Fertilizers
UREA (Free-flowing)
Properties of UREA (Free-flowing)
Moisture content by weight: maximum 1%
Total nitrogen content by weight (on dry basis): minimum 46%
Biuret content by weight: minimum 1.5%
Particle size: Not less than 90% of the material shall pass through 2.8 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm IS sieve
Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost
UREA (Granular)
Properties of UREA (Granular)
Moisture content by weight: maximum 1%
Total nitrogen content by weight (on dry basis): minimum 46%
Biuret content by weight: minimum 1.5%
Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and be retained on 2 mm IS sieve. Not more than 5% shall be below 1 mm IS sieve
Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost
NOTE: We only supply when specially requested (for machine application). As it is slightly more expensive than free-flowing UREA.
AMMONIUM Fertilizers
AMMONIUM SULPHATE
Properties of Ammonium Sulphate
Moisture content by weight: maximum 1%
Total nitrogen content by weight (on dry basis): minimum 20%
Free acidity (as H2SO4) by weight: maximum 0.025%
Sulphur (as S) by weight: minimum 23%
Each bag to guarantee minimum product weight (net) as specified on the bag
Marking: FAO logo, product name, active ingredient(s), net and gross weight, Project No., P.O. No. and final destination
Particle size: Not less than 90% of the material shall pass through 2.8 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm IS sieve
Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost
CALCIUM AMMONIUM NITRATE (CAN)
Properties of Ammonium Nitrate (CAN)
Moisture content by weight: maximum 1%
Total nitrogen content by weight (on dry basis): minimum 26%
Ammoniacal nitrogen by weight: 50% of total nitrogen
Nitrate nitrogen by weight: 50% of total nitrogen
Calcium and/or magnesium carbonate by weight: minimum 18%
Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm IS sieve
Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost
Phosphate & Potassium Fertilizers
SINGLE SUPERPHOSPHATE (SSP)
Properties of Single Superphosphate (SSP)
Moisture content by weight: maximum 5%
Free phosphoric acid (as P2O5) by weight: maximum 4%
Water-soluble phosphate (as P2O5) by weight: minimum 15.8%
Sulphur (as S) by weight: minimum 11%
Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and shall be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm
Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost
TRIPLE SUPERPHOSPHATE (TSP)
Properties of Triple Superphosphate (TSP)
Moisture content by weight: maximum 5%
Free phosphoric acid (as P2O5) by weight: maximum 3%
Total phosphates (as P2O5) by weight: minimum 46%
Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and shall be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm
Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost
POTASSIUM CHLORIDE/ MURIATE OF POTASH (MOP)- Crystalline Powder
Properties of Potassium Chloride/Muriate of Potash (MOP) - Crystalline Powder
Moisture content by weight: maximum 0.5%
Water-soluble potash content (as K2O) by weight: minimum 60%
Sodium (as NaCl) by weight: maximum 3.5%
Particle size: Not less than 65 % of the material shall pass through 1.7 mm IS sieve and be retained on 0.25 mm IS sieve
Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost
POTASSIUM CHLORIDE/MURIATE OF POTASH (MOP) - Granular
Properties of Potassium Chloride/Muriate of Potash (MOP) - Granular
Moisture content by weight: maximum 0.5%
Water soluble potash content (as K2O) by weight: minimum 60%
Sodium (as NaCl) by weight: maximum 3.5%
Sodium (as NaCl) by weight: maximum 3.5%
Particle size: Not less than 90% of the material shall pass through 3.35 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5% should be below 1 mm in size.
Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost
POTASSIUM SULPHATE/SULPHATE OF POTASH (SOP)
Properties of Potassium Sulphate/Sulphate of Potash (SOP)
Moisture content by weight: maximum 1.5%
Potash content (as K2O) by weight: minimum 50%
Total chlorides (as Cl) by weight: maximum 2.5%
Sodium (as NaCl) by weight: maximum 2%
Sulphur (as S) by weight: minimum 17.5%
Total chlorides (as Cl) by weight: maximum 2.5%
Particle size: Not less than 65 % of the material shall pass through 1.7 mm IS sieve and be retained on 0.25 mm IS sieve
Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost
DIAMMONIUM PHOSPHATE (DAP)
Properties of Diammonium Phosphate (DAP)
Moisture content by weight: maximum 1.5%
Total nitrogen content by weight (on dry basis): minimum 18%
Neutral ammonium citrate soluble phosphate (as P2O5) content by weight: minimum 46%
Water-soluble phosphate (as P2O5) content by weight: minimum 41%
Particle size: Not less than 90% of the material shall pass through 4 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5% shall be below 1 mm size
Packing: Packed in 50 kg (dry) capacity woven polypropylene bags with polyethylene inner lining. 4% empty bags to be supplied at no extra cost
Calciprill (Granulated Calcium Carbonate)
Calciprill is prill made from very finely ground purity calcium carbonate. The application is done to adjust soil PH. It is applied to tree crops, pasture and other crops. Calciprill is highly reactive and equally effective at rates 80-90 % lower than required by standard aglime. The rounded prills mean it can be applied, on its own or with additional fertilizer & seeds, by anyone with standard fertilizer spreaders.
Why use Calciprill
Rapid pH improvement means rapid crop response
Flexible application means less dependence on weather conditions
Useful in precision agriculture
Can be applied by air to steep terrain allowing utilization of all pasture
Excellent source of calcium, an essential nutrient in plant cell structure
Allows farmers to carry out regular soil maintenance
Application Rates (0.1 pH Improvement)
Application rate depends on soil type, pH-value, and crop.
Micronutrient Fertilizers
ZINC SULPHATE
Properties of Zinc Sulphate
Zinc (as Zn) content by weight: minimum 21%
Sulphur (as S) content by weight: minimum 10%
Lead (as Pb) content by weight: maximum 0.003%
Copper (as Cu) content by weight: maximum 0.1%
Magnesium (as Mg) content by weight: maximum 0.5%
Cadmium (as Cd) content by weight: maximum 0.0025%
Arsenic (as As) content by weight: maximum 0.01%
Matter insoluble in water by weight: maximum 1%
pH: not less than 4
Form: free-flowing powder
CHELATED Zn, AS Zn-EDTA
Properties of CHELATED Zn, AS Zn-EDTA
Zinc content (expressed as Zn) by weight in the form of Zn-EDTA complex: minimum 12%
Lead (as Pb) content by weight: maximum 0.003%
pH: 6.0 – 6.5
Form: free-flowing crystalline/powder
MANGANESE SULPHATE
Properties of Manganese Sulphate
Manganese (as Mn) content by weight: minimum 30.5%
Sulphur (as S) content by weight: minimum 17%
Lead (as Pb) content by weight: maximum 0.003%
Copper (as Cu) content by weight: maximum 0.1%
Magnesium (as Mg) content by weight: maximum 2%
Matter insoluble in water by weight: maximum 1%
pH: not less than 3.75
Form: free-flowing powder
BORAX (SODIUM TETRABORATE)
Properties of Borax (Sodium Tetraborate)
Boron (as B) content by weight: minimum 10.5%
Lead (as Pb) content by weight: maximum 0.003%
Matter insoluble in water by weight: maximum 1%
pH: 9.0-9.5
Form: free-flowing powder
COPPER SULPHATE
Properties of Copper Sulphate
Copper (as Cu) content by weight: minimum 24%
Sulphur (as S) content by weight: minimum 12%
Soluble iron and aluminium compounds (expressed as Fe) content by weight: maximum 0.5%
Lead (as Pb) content by weight: maximum 0.003%
Matter insoluble in water by weight: maximum 1%
pH: not less than 3
Form: free-flowing powder/granular
FERROUS SULPHATE
Properties of Ferrous Sulphate
Ferrous iron (as Fe) content by weight: minimum 19%
Sulphur (as S) content by weight: minimum 10.5%
Free acid (as H2SO4) content by weight: maximum 1%
Ferric iron (as Fe) content by weight: maximum 0.5%
Lead (as Pb) content by weight: maximum 0.003%
Matter insoluble in water by weight: maximum 1%
PH: not less than 3.5
Form: free-flowing powder
AMMONIUM MOLYBDATE
Properties of Ammonium Molybdate
Molybdenum (as Mo) content by weight: minimum 52%
Lead (as Pb) content by weight: maximum 0.003%
Matter insoluble in water by weight: maximum 1%
pH: 5.0-5.5
Form: free-flowing crystalline/powder
Rock Phosphate (RP)/Phosphate Rock (PR) for Direct Application
Total phosphates (as P2O5) content by weight: between 15-35% depending on source
Cadmium (as Cd) content by weight: maximum 27 mg/kg of RP
Particle size: Not less than 90% of the material shall pass through 0.15 mm IS sieve and the balance shall pass through 0.25 mm IS sieve
Organic Manures
Organic Manure